Jump – Knee Brace

Read a peer-reviewed article about the brace here.

The Balto^® Jump stifle knee brace is carefully designed to stabilize your dog's post-traumatic or acquired knee joint deficiency. The Balto® Jump is designed to support one of the most common injuries in canines, Cranial Cruciate Ligament (CCL) trauma. Affecting millions of patients annually, CCL injuries include: full or partial tearing of the ligament, Luxation of the patella, and Knee joint conditions such as arthritis, arthrosis and varus/valgus instability. This canine knee joint brace is a great solution for dogs suffering from limited mobility following injuries to the CCL joint. This breathable compression wrap, made with non-neoprene material, provides stability and support to your dog's rear legs without compromising natural movement. This knee brace is an excellent option for dogs in need of additional support while maintaining an active lifestyle.

• CCL tears (partial and full)
• Partial CCL tears can take about 6 months to stabilize, and up to a year to form mature scar tissue to stabilize the knee to regular function.
• Full CCL tears, depending on severity, can take up to a year to stabilize and an additional year to form mature scar tissue that can stabilize the knee to regular function.
• Post-surgical support (for surgeries such as TPLO, TTA, ELSS, and MPL)
• Structural support to injured or affected limbs.
• Chronic canine knee pain management
• Complementary treatment option to physical therapy – can be used in combination with hydrotherapy and acupuncture
• Special circumstances or conservative treatment preference; bracing can be used as an alternative to surgery for ineligible surgical candidates
• This brace can be used on healthy joints, muscles and ligaments to prevent injury and provide structural support

• Two pockets which contain angled airplane aluminum splints (medial and lateral) that help restrict the lateral movement (also referred to as a drawer movement) of the knee when necessary.
• Abdominal band to ensure the brace is secured around the dog’s hind end.
• A third, additional stabilization strap is provided for more active animals.
• The brace can also be used without splints for conditions such as arthritis and arthrosis.
• Compression helps increase blood flow in the affected area, which helps reduce stiffness, pain, and inflammation
• Adjustable upper and lower padding straps can be lengthened or shortened on the leg to ensure an excellent fit

Using the Balto® Jump on both the left and right knees can also help with cases related to:

• Senior dogs as a result of general degenerative process
• Overweight dogs dealing with high pressure on their good leg
• Active dogs with an important compensation behavior

Comes in sizes xx-small through x-large, for a left or right orientation. Please note that the xx-small size can only be worn in female orientation (in small breeds this is okay for most males) and is unable to be connected to a second knee brace to provide bilateral support. To find the best size for your pet, visit the sizing chart here.

All Balto® braces are made from high-quality materials, not neoprene, which is known to: collect bacteria, provide inadequate support, and wear down quickly. A variety of sizes ensure a secure fit. No pinching straps.

Recommended for all ages unless otherwise advised by veterinarians. Apply brace for balanced increments of time, if appropriate, for pets under the age of 2 to prevent possible growth disturbances.

How to Apply Brace

XXS Size | with Anchor Kit (Male Dogs) | without Anchor Kit (Female Dogs)

INSTRUCTION FOR XXS SIZE

Step 1

Prepare the brace by opening the straps.

Step 2

Position the brace by lining up the central hole with the dog’s knee (patella) and secure all the Velcro straps (starting with the bottom strap) around the leg by passing them through the buckles. Tightly close with the Velcro straps.

Step 3

Pass the back strap under the belly and over the dog’s back.

Step 4

Pass the band towards the brace buckle on the other leg. Insert the band into the buckle and close securely.

Step 5

The band is adjustable, remove the rounded Velcro end. Cut the Velcro strap to the desired length. Re-apply to the rounded Velcro end.

Step 6

Stick the band on itself, closing it tight.

Step 7

Apply one side of the harness strap under a harness or collar, and the other side under the back strap and closing it tight.

---

INSTRUCTION WITH ANCHOR KIT (MALE)

Step 1

Prepare the brace by opening the straps (Fig. 1).

Step 2

Position the brace by lining up the central hole with the dog’s knee (patella) and secure all the Velcro straps (starting with the bottom strap) around the leg by passing them through the buckles. Tightly close with the Velcro straps.

Step 3

Pass the back strap over the dog’s back, open up the anchor kit, and close it around the top of the contralateral leg. Tightly close with the Velcro strap.

Step 4

The straps and anchor kit are adjustable: Remove the Velcro ends and cut the strap to the desired length. Reapply the Velcro ends and tightly close with the Velcro strap to ensure the brace is stable.

Step 5

Pass the collar strap under the collar or harness (Fig. 5A and 5B) and attach the other strap under the back strap (Fig. 5C).

NOTE: Exchanges and returns will NOT be accepted if the brace is altered.

---

INSTRUCTION WITHOUT ANCHOR KIT (FEMALE)

Step 1

Prepare the brace by opening the straps and remove the anchor kit (Fig. A1). Make sure the back strap is attached to the inner thigh (lower) buckle (Fig. A2).

Step 2

Position the brace by lining up the central hole with the dog’s knee (patella) and secure all the Velcro straps (starting with the bottom strap) around the leg by passing them through the buckles. Tightly close with the Velcro straps.

Step 3

Pass the back strap UNDER the abdomen and over the back. Insert it into the top buckle of the brace and tightly close with the Velcro strap.

Step 4

The straps and anchor kit are adjustable: Remove the Velcro ends and cut the strap to the desired length. Reapply the Velcro ends and tightly close with the Velcro strap to ensure the brace is stable.

Step 5

Pass the collar strap under the collar or harness (Fig. 5A and 5B) and attach the other strap under the back strap (Fig. 5C).

NOTE: Exchanges and returns will NOT be accepted if the brace is altered.

• Is the Left or Right orientation from my point of view, or my dog’s?
  • The orientation is your dog’s point of view, you can also distinguish this by standing behind them. For example, “right” is your dog’s right leg just as your (human) “right” leg is your right leg.
• Does it come with straps?
  • Yes! All knee braces come with anchor kits, which make up all the straps needed to assemble the brace.
• Do the straps fit the same way for females and males?
  • No, you will want to change the way the strap wraps under the body for the brace depending on your pet’s sex. Watch our video to see the best application for females or males.
• How do I purchase a knee brace for both knees?
  • To purchase a bilateral knee brace, shop Bundles. Bracing both knees is an excellent way to support a second injured knee, or to support the healthy one that is bearing additional stress while the injured knee heals.
• My dog does not wear collars, how do I attach the back strap?
  • The back strap can attach to either a body/ torso harness or a collar. For the best support, getting a collar or harness is advised. There are several more affordable options on online stores like Amazon or your local store that carries pet supplies.
• I need to replace the straps, can I purchase more?
  • Absolutely! Visit Brace Parts to purchase separate anchor kits for the brace. Whether your pet chewed on the straps, they were lost, or you accidentally cut too short, spare parts are available for replacement on most braces.

Compare Like Braces

	Balto Jump	Bilateral Balto Jump	Balto Ligatek
Uses	Used to stabilize the knee and provide compression.	Used to stabilize the knee and provide compression bilaterally.	Used to control the range of motion (ROM) and stabilize the knee.
Splints	The aluminum (slightly adjustable) splints are removable.	The aluminum (slightly adjustable) splints are removable bilaterally.	The aluminum splints are not removable, but are adjustable.
Fit	Uses adjustable Velcro for a secure fit and comes with a male and female anchor kit.	Uses adjustable Velcro for a secure fit while the braces anchor together across the back.	Uses adjustable hinges and padding for a secure fit and comes with a kit for setting the range of motion (ROM).

Need Replacement Parts? The following parts are available for this brace:

REPLACEMENT PART Velcro® Tabs

A clean brace not only prevents infections, irritation, and a stinky smell; but it also allows your brace to last longer. To help support the longevity of your bracing device, here are some of our tips on how to properly clean your orthopedic bracing:

1. Remove as much hair as possible from any Velcro^® frequently to prevent compaction.
2. Use lint roller or lightly adhesive tape to remove hair from the material of the brace.
3. By hand, use warm water and a gentle cleansing soap to remove any stains and odors.
4. Rinse soap thoroughly from the brace
5. Hang to dry. Once the brace is completely dry, it is ready for use!