Right Advanced Knee Plus
Right Advanced Knee Plus
Right Advanced Knee Plus

Right Advanced Knee Plus

Regular price$429.98
/
 
  • In stock, ready to ship
  • Backordered, shipping soon

Sophisticated bracing for an affected leg and support of the at-risk knee. Allows for an adjustable range of motion of an injured limb and protective support for the compensating canine knee.

BILATERAL SUPPORT FOR
  • Post-surgical/ post-TPLO knee support
  • Healthy or at-risk knee while compensating the weight of injured leg
  • Cranial Cruciate Ligament (CCL) Injuries
  • Luxating Patella
  • Alternate to TPLO, TTA, ELSS, and MPL surgeries

Read Full Product Details

View Full Size Chart


made in italy badge

 


This Balto® Bundle contains 1 Balto® Jump brace and a 1 Balto® Ligatek brace, left and right orientation, to provide advanced bilateral support to canine’s knees.

The Balto® Ligatek is carefully designed to stabilize your dog's post-traumatic or acquired knee joint deficiency. With its adjustable hinges, the user can control the ROM (range of motion), and lock the injured knee joint into full immobilization or controlled degrees of flexion/extension.

In canines with knee injuries, there is a 70% chance of injury to the other knee from additional weight and wear while the injured leg rehabilitates. When the Ligatek is paired with the Balto Jump, the Jump is able to provide structural support – ensuring healthy movement of the at-risk joint.

BRACE APPLICATIONS

This bracing bundle is intended for the support of 2 injured knees, or 1 at-risk knee and 1 affected knee.

  • This brace can be used on healthy joints, muscles and ligaments to prevent injury to at-risk knees
  • CCL tears (partial and full)
    • Partial CCL tears can take about 6 months to stabilize, and up to a year to form mature scar tissue to stabilize the knee to regular function.
    • Full CCL tears, depending on severity, can take up to a year to stabilize and an additional year to form mature scar tissue that can stabilize the knee to regular function.
  • Post-surgical support (for surgeries such as TPLO, TTA, ELSS, and MPL)
  • Structural support to injured or affected limbs
  • Special circumstances or conservative treatment preference; bracing can be used as an alternative to surgery for ineligible surgical candidates.
BRACE FEATURES
  • The Ligatek comes with adjustable upper and lower hardware that can be lengthened or shortened on the leg to ensure an excellent fit.
  • The Jump comes with 2 pockets containing angled airplane aluminum splints on either side of the knee to promote healthy drawer movement of the knee.
  • Two durable straps: one over the hind end to anchor both knee braces together and the other to stabilize by attaching to a harness or collar
  • Knee braces can be used together, or can function as singular knee support when separated.
  • The Balto Jump can be used without splints for conditions such as arthritis and arthrosis.
    • Compression helps increase blood flow in the affected area, which helps reduce stiffness, pain, and inflammation

Please note that sizing differs between braces. The Balto Jump comes in sizes x-small through x-large, for left and right orientation. The Balto Ligatek comes in sizes small through x-large. To find the best size for your pet, visit the sizing chart here.

Handwashable
Vet approved and preferred
Non-neoprene

Learn How Properly Fit the Balto Jump Bilateral Brace to Your Pet

All Balto® braces are made from high-quality materials, not neoprene, which is known to: collect bacteria, provide inadequate support, and wear down quickly. A variety of sizes ensure a secure fit. No pinching straps.

Recommended for all ages unless otherwise advised by veterinarians. Apply brace for balanced increments of time, if appropriate, for pets under the age of 2 to prevent possible growth disturbances.

How to Apply Brace

Step 1

Start by removing the anchor kit and applying the Jump to the left leg (see Jump "Instructions for Use") (Fig. 1 & 2).

(Fig. 1).
figure 1 for balto jump x ligatek  dog brace
Step 2
(Fig. 2)
figure 2 for balto jump x ligatek dog brace
Step 3

From the Ligatek, keep only the back strap and remove the anchor that would wrap around the contralateral leg (Fig. 3)

(Fig. 3)
figure 3 for balto jump x ligatek dog brace
Step 4

Apply the Ligatek to the right leg (see Ligatek "Instructions for Use") (Fig. 4).

(Fig. 4)
figure 4 for balto jump x ligatek dog brace
Step 5

Apply the Velcro to the top of the Ligatek and add the back strap over the dog’s back (Fig. 5).

(Fig. 5)
figure 5a for balto jump x ligatek dog brace
Step 6

Insert it into the top buckle of the brace and tightly close with the Velcro strap (Fig. 6).

(Fig. 6)
figure 6 for balto jump x ligatek dog brace
Step 7

The back strap is adjustable: Remove the Velcro end and cut the strap to the desired length. Reapply the Velcro end and tightly close with the Velcro strap to ensure the brace is stable (Fig. 7 & 8).

(Fig. 7)
figure 7 for balto jump x ligatek dog brace
Step 8
(Fig. 8)
figure 8 for balto jump x ligatek dog brace
Step 9

Pass the collar strap under the collar or harness and attach the other strap under the back strap (Fig. 9-11).

(Fig. 9)
figure 9 for balto jump x ligatek dog brace
Step 10
(Fig. 10)
figure 10 for balto jump x ligatek dog brace
Step 11
(Fig. 11)
figure 11 for balto jump x ligatek dog brace

  • What is the Right Advanced Knee Plus?
    • This bundle provides support for both legs. If the right knee is going through rehabilitation or is healing post-surgery, the left knee is also protected against injuries with the Balto Jump Knee Brace
  • I’m not sure which brace to get for each leg?
    • This all depends on what your veterinarian recommends. It is important to consult with them so they can give the best advice and monitor the healing progress of your fur pup.

  • Allow up to two weeks for your pet to fully accept the brace
  • Wear the brace for 30 minutes a day, increasing 30 minutes each day after, for up to 12 hours
  • Consult your veterinarian for specific instructions on when to wear your brace
  • Remove the brace when your animal sleeps at night
  • Inspect your pet for signs of skin irritation. If any are present, contact your veterinarian
  • In addition to wiping the brace clean, keep skin and fur that comes into contact with the brace clean
  • Inspect your brace regularly for any damage

Need Replacement Parts? The following parts are available for this brace:

REPLACEMENT PART Velcro® Tabs

 

A clean brace not only prevents infections, irritation, and a stinky smell; but it also allows your brace to last longer. To help support the longevity of your bracing device, here are some of our tips on how to properly clean your orthopedic bracing:

  1. Remove as much hair as possible from any Velcro® frequently to prevent compaction.
  2. Use lint roller or lightly adhesive tape to remove hair from the material of the brace.
  3. By hand, use warm water and a gentle cleansing soap to remove any stains and odors.
  4. Rinse soap thoroughly from the brace
  5. Hang to dry. Once the brace is completely dry, it is ready for use!

How Do we Stack Up?

US vs THEM

  Many Sizes
Available
Non-Neoprene
Material
Stabilization
Splints
Wide Size
Variety
Balto Logo
Animal Ortho Care Logo
Merrymilo Logo
OrtoCanis Logo
Ortho Dog Logo ?
Tailwind Logo
Neoally Logo

See if your pet insurance will cover a prescription for Balto®

vet tech icon
vet icon
embrace pet insurance logo
rehab icon
Learn More

Size Chart

Balto Jump
SIZE SKU (Left/Right) WEIGHT A B C
XX-Small BTJUMPXXSL (Left)

BTJUMPXXSR (Right)

5 - 10 lbs 3" - 5" 1" - 2" 3"
X-Small BTJUMPXSL (Left)

BTJUMPXSR (Right)

10 - 20 lbs 6" - 7" 2" - 2.75" 4"
Small BTJUMPSL (Left)

BTJUMPSR (Right)

20 - 45 lbs 8" - 10" 3" - 6" 6"
Medium BTJUMPML (Left)

BTJUMPMR (Right)

35 - 65 lbs 10" - 12" 4" - 6" 7"
Large BTJUMPLL (Left)

BTJUMPLR (Right)

60 - 100 lbs 11.5" - 13" 4.75" - 7" 8.75"
X-Large BTJUMPXLL (Left)

BTJUMPXLR (Right)

100 - 135 lbs 14"+ -- 9.25"

Measurement A: Circumference of middle to upper thigh
Measurement B: Circumference above the hock
Measurement C: Distance between A and B over the knee

Balto Ligatek
SIZE SKU WEIGHT A B C
Small BTLIGATEKL-S (Left)

BTLIGATEKR-S (Right)

20 - 35 lbs 8.25" - 10" 3" - 6" 4.3" - 5.5"
Medium BTLIGATEKL-M (Left)

BTLIGATEKR-M (Right)

35 - 65 lbs 10" - 12" 4" - 6" 5.5 " - 7"
Large BTLIGATEKL-L (Left)

BTLIGATEKR-L (Right)

60 - 110 lbs 11.5" - 13"4.75" - 7" 6" - 8.75"
X-Large BTLIGATEKL-XL (Left)

BTLIGATEKR-XL (Right)

110+ lbs 14"+ -- 6.3" - 9.25"

Measurement A: Circumference of middle to upper thigh
Measurement B: Circumference above the hock
Measurement C: Distance between the knee and the base of the hock

Balto Jump
SIZE SKU (Left/Right) WEIGHT A B C
XX-Small BTJUMPXXSL (Left)
BTJUMPXXSR (Right)
2-5kg 8-13 cm 3-5 cm 8 cm
X-Small BTJUMPXSL (Left)
BTJUMPXSR (Right)
5-10kg 16-18 cm 5-7 cm 10 cm
Small BTJUMPSL (Left)
BTJUMPSR (Right)
10 -15kg 21-25 cm 8-15 cm 15 cm
Medium BTJUMPML (Left)
BTJUMPMR (Right)
15 -30kg 26-31 cm 10-16 cm 18 cm
Large BTJUMPLL (Left)
BTJUMPLR (Right)
28 –50kg 29-34 cm 12-18 cm 22 cm
X-Large BTJUMPXLL (Left)
BTJUMPXLR (Right)
Over 50kg over 36 cm -- 25 cm

Measurement A: Circumference of middle to upper thigh
Measurement B: Circumference above the hock
Measurement C: Distance between A and B over the knee

Balto Ligatek
SIZE SKU WEIGHT A B C
Small BTLIGATEKL-S (Left)

BTLIGATEKR-S (Right)

10 -15kg 21-25 cm 8-15 cm 11-14 cm
Medium BTLIGATEKL-M (Left)

BTLIGATEKR-M (Right)

15-30 Kg 26-31 cm 10-16 cm 14-18 cm
Large BTLIGATEKL-L (Left)

BTLIGATEKR-L (Right)

28–50 Kg 29-34 cm 12-18 cm 15-22 cm
X-Large BTLIGATEKL-XL (Left)

BTLIGATEKR-XL (Right)

Over 50Kg Over 36 cm -- 16-23 cm

Measurement A: Circumference of middle to upper thigh
Measurement B: Circumference above the hock
Measurement C: Distance between the knee and the base of the hock

Instructions for Use

Step 1

Start by removing the anchor kit and applying the Jump to the left leg (see Jump "Instructions for Use") (Fig. 1 & 2).

(Fig. 1).
figure 1 for balto jump x ligatek  dog brace
Step 2
(Fig. 2)
figure 2 for balto jump x ligatek dog brace
Step 3

From the Ligatek, keep only the back strap and remove the anchor that would wrap around the contralateral leg (Fig. 3)

(Fig. 3)
figure 3 for balto jump x ligatek dog brace
Step 4

Apply the Ligatek to the right leg (see Ligatek "Instructions for Use") (Fig. 4).

(Fig. 4)
figure 4 for balto jump x ligatek dog brace
Step 5

Apply the Velcro to the top of the Ligatek and add the back strap over the dog’s back (Fig. 5).

(Fig. 5)
figure 5a for balto jump x ligatek dog brace
Step 6

Insert it into the top buckle of the brace and tightly close with the Velcro strap (Fig. 6).

(Fig. 6)
figure 6 for balto jump x ligatek dog brace
Step 7

The back strap is adjustable: Remove the Velcro end and cut the strap to the desired length. Reapply the Velcro end and tightly close with the Velcro strap to ensure the brace is stable (Fig. 7 & 8).

(Fig. 7)
figure 7 for balto jump x ligatek dog brace
Step 8
(Fig. 8)
figure 8 for balto jump x ligatek dog brace
Step 9

Pass the collar strap under the collar or harness and attach the other strap under the back strap (Fig. 9-11).

(Fig. 9)
figure 9 for balto jump x ligatek dog brace
Step 10
(Fig. 10)
figure 10 for balto jump x ligatek dog brace
Step 11
(Fig. 11)
figure 11 for balto jump x ligatek dog brace

Recently viewed